DeXlan MPEG4 Manual de usuario descargar pdf (Pagina 51)

3. Change your PC’s IP address from 192.168.300.25 to 192.168.0.25. To verify

make sure the first 3 sections of the IP address of the Network Camera corresponds

to the first 3 sections of the PC. But you can not set the same IP address of

Network Camera and your PC.

4. Restart Computer

5. Click the “IP Installer” button, find the Camera and click on “Link to selected device”

button, now you will connect the I.E. to the Camera.

6. Check Page.12 to Install Plun-in.

7. Click “Configuration” on the main screen.

8. Click “Network” and change the IP address from 192.168.0.99 to 192.168.300.99

The new IP address must be a free IP address in your LAN.

9. Change your PC’s address back.

10.Restart Computer.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 63 64

Sin comentarios

DeXlan MPEG4 Manual de usuario Pagina 51